Home » Tungsten Carbide Products » Carbide Drawing Dies » TUNGSTEN CARBIDE COLD HEADING DIES

TUNGSTEN CARBIDE COLD HEADING DIES

Category: Carbide Drawing Dies
|
Date: 2020-04-07 11:41

Tungsten carbide drawing dies Cold heading dies Die Casting Carbide grade for drawing dies as follows: Grade Density(g/cm3) Hardness(HRA) TRS(MPa) Applications recommended YG6X 14.95 91.5 1800 For drawing steel and nonferrous wires or bars of less than ￠6.00mm...

Product Details

Tungsten carbide drawing dies

Cold heading dies

Die Casting

Carbide grade for drawing dies as follows:

Grade	Density(g/cm3)	Hardness(HRA)	TRS(MPa)	Applications recommended
YG6X	14.95	91.5	1800	For drawing steel and nonferrous wires or bars of less than ￠6.00mm under not so much stress.
YG6	14.95	90.5	1900	For drawing steel, nonferrous alloy bars of less than ￠20.00mm under more stress and also for drawing tubes of less than ￠10.00mm.
YG8	14.8	89.5	2200	For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts.
YG10	14.5	88.5	2400
YG15	14.0	87.0	2800	For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting.